( In mm. ) Size 200x1200 Per Carton No. of Tiles 6 Packing Details Covered Area Per Carton ( In Sq. Mtr. ) ( In Sq. Ft. ) 1.44 15.5 Characteristics Dimensions and Surface Quality Deviation in Thickness Deviation in Length & Width Straightness in Side Rectangularity Surface Flatness Surface Quality Modulus of Rupture Breaking Strength Moisture Expansion Thermal Shock Resistance Impact Resistance Resistance to Surface abrasion of glazed tiles Frost Resistance Physical Properties Water Absorption MOH’s Hardness Co-efficient of Friction Linear Thermal expansion CO-effecient Chemical Properties Stain Resistance glazed tiles ± 5.0 % ± 0.10 % ± 0.5 % STANDARD AS PER IS 15622:2017 GROUP B Ia ± 0.10 % ± 0.10 % Average ≤0.08%, individual 0.10% Max. Class I Min Class AA Test Method ISO-10545-2 IS 13630 Part 1 OBL Value ± 4.0 % ± 0.10 % ± 0.2 % ± 0.10 % ± 0.10 % Conform NOTE: Cer tain amount of Size and Shade Variation is inherent in all ceramic products. Within the limits of printed material, the colors and aesthetics of the products correspond closely to those of illustrated products. Prospective customers are advised to inspect a sample of the tile before ordering and laying. At all points of time, the company liability is restricted to the purchase value of tiles. Every effor t has been made to ensure the accuracy of the information given. However, the company reserves the right to delete & change, any of the items, colors, sizes & technical specications without any prior notice. Glazed Vitrified Tiles (Planks) TECHNICAL SPECIFICATIONS IS 13630 Part 1 IS 13630 Part 1 IS 13630 Part 1 IS 13630 Part 1 IS 13630 Part 1 Min 95% of the tiles shall be free from visible defects that would impair the appearance of a major area of the tile Min 95% of the tiles shall be free from visible defects that would impair the appearance of a major area of the tile Bulk density g/cc Average ≤0.08%. IS 13630 Part 2 IS 13630 Part 6 IS 13630 Part 6 IS 13630 Part 3 IS 13630 Part 13 IS 13630 Part 4 IS 13630 Part 5 IS 13630 Part 14 IS 10545 part-17 IS 13630 Part 10 IS 13630 Part 11 IS 13630 Part 2 IS 13630 Part 8 IS 13630 Part 8 Average 35, individual 32 Min. 1300 Min Thickness ≥7.5 mm 0.02 Max 5 Min 6 6x10- max 10 Cycle Min 0.55 , Min Manufacturer to declare the value & test method Required if agreed to between manufacturer and purchaser Class II, Min 2.2 , Min 2 Min 38 N/mm >1300 N 0.02 Max If Surface Matt > 5, for Glossy >3 -6 6x10 max Passed 0.75 to 0.80 45 in Dry Condition (Pendulum Method) 50 cycle passed Class II, Min 2.2 , Min Resistance to Household chemicals, Resistance to acids & alkalis (Except HF) Class AA
RkJQdWJsaXNoZXIy MTM4MzExMg==